Product Name: 1.2-meter&1.6-meter Combination Shield
1、 Product Introduction
Ordinary Shield
The shield is composed of two pieces: a 1600 × 550 × 3.5 large shield and a 1200 × 550 × 3.5 small shield. Both large and small shields are composed of shield body, reinforcing layer, foam liner, grip, handle, etc. The shield bodies and reinforcement layers of both the large and small shields are integrally formed by hot pressing PC boards. There is a semi-circular overlap surface on each side of the left and right sides, which allows multiple shields to overlap with each other to form a shield wall. The lower end of the small shield reinforcement layer has a V-shaped slot placed at the upper end of the large shield, forming an upper and lower protective connection.Riot Shield
Multiple combination riot shields can be connected to each other using semi-circular grooves formed on both sides of the width to form a row of shield walls. Each set of combinations is operated simultaneously by two people, one in front and one behind. The shield wall resists attacks from external knives, sticks, rods, stones, etc., effectively covering the advance, evacuation, and obstruction of the enemy's advances behind.PC Shield
2、 Technical parameters
1. Size specifications: 1 piece each for 1600 × 550 × 3.5 and 1200 × 550 × 3.5 (with a 3mm thick backing plate)
2. Protection area: 0.653m2 (small shield), 0.868 m2 (large shield), combined area is 1.483 m2
3. Weight: Total weight: 10.98kg, 5.11kg (small shield), 5.87kg (large shield)
4. Transmittance ≥ 80%
5. Impact resistance: withstand impacts of ≥ 147 joules of kinetic energy without breaking the shield
6. Puncture resistance: capable of withstanding puncture with 20 joules of kinetic energy from standard cutting tools
7. Flame retardancy: After leaving the water source, the shield can continue to burn for less than 5 seconds
8. Grip connection strength: withstands a tensile force of ≥ 500N, and the grip and shield do not loosen or detach